Ultra Flat Polished Brass Sockets and Switches

These are plug sockets and light switches on a Varilight flat plate finished with a polished brass finish.
They are available in a full range of metal switches and switches. Sockets are available with either white plastic or black plastic inserts.
Please don't forget, you will need a deeper back-box to fit these plates:
Back boxes:
Switches 25mm
Socket & Dimmers 35mm
USB Sockets, Shaver & Cooker Switches 47mm
To avoid installation problems fitting boxes must be fitted below the plaster depth.
We also have a wide range of polished brass lights to go with these polished brass sockets and switches. We have everything from polished brass ceiling light, brass wall lights and polished brass table lights.
Products


- Type: Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Switch Colour: Polished Brass
- Plate Material: Metal
- Amperage: 10 Amp
- Faceplate Depth: 1mm
- Switch Type: Two Way
- 1 way and 2 way switching: Yes
- Gang: 1
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Switch Colour: Polished Brass
- Plate Material: Metal
- Amperage: 10 Amp
- Faceplate Depth: 1mm
- Switch Type: Two Way
- 1 way and 2 way switching: Yes
- Gang: 2
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Switch Colour: Polished Brass
- Plate Material: Metal
- Amperage: 10 Amp
- Faceplate Depth: 1mm
- Switch Type: Two Way
- 1 way and 2 way switching: Yes
- Gang: 3
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 25mm


- Switch Colour: Polished Brass
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Type: Switch
- Finish: Polished Brass
- Faceplate Depth: 1mm
- Switch Type: Two Way
- 1 way and 2 way switching: Yes
- Amperage: 10 Amp
- Gang: 3
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Amperage: 10 Amp
- Faceplate Depth: 1mm
- Switch Type: Two Way
- 1 way and 2 way switching: Yes
- Finish: Polished Brass
- Gang: 4
- Switch Colour: Polished Brass
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Switch Colour: Polished Brass
- Plate Material: Brass
- Amperage: 10 Amp
- Faceplate Depth: 1mm
- Switch Type: Two Way
- 1 way and 2 way switching: Yes
- Finish: Polished Brass
- Gang: 6
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Toggle Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Amperage: 10 Amp
- Switch Type: Two Way
- 1 way and 2 way switching: Yes
- Finish: Polished Brass
- Gang: 1
- Switch Colour: Polished Brass
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Toggle Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Amperage: 10 Amp
- Switch Type: Two Way
- 1 way and 2 way switching: Yes
- Finish: Polished Brass
- Gang: 2
- Switch Colour: Polished Brass
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Toggle Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Amperage: 10 Amp
- Switch Type: Two Way
- 1 way and 2 way switching: Yes
- Finish: Polished Brass
- Gang: 3
- Switch Colour: Polished Brass
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Toggle Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Brass
- Amperage: 10 Amp
- Switch Type: Two Way
- 1 way and 2 way switching: Yes
- Finish: Polished Brass
- Gang: 4
- Switch Colour: Polished Brass
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Socket
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Insert: White
- Amperage: 13 Amp
- Faceplate Depth: 1mm
- Double Pole: Yes
- Finish: Polished Brass
- Gang: 1
- Switch Colour: Polished Brass
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 35mm


- Type: Socket
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Amperage: 13 Amp
- Faceplate Depth: 1mm
- Double Pole: Yes
- Finish: Polished Brass
- Inserts: Black
- Gang: 1
- Switch Colour: Polished Brass
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 35mm


- Type: Socket
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Amperage: 13 Amp
- Faceplate Depth: 1mm
- Double Pole: Yes
- Finish: Polished Brass
- Inserts: White
- Gang: 2
- Switch Colour: Polished Brass
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 35mm


- Type: Socket
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Plate Material: Metal
- Amperage: 13 Amp
- Faceplate Depth: 1mm
- Switch Colour: Polished Brass
- Double Pole: Yes
- Insert: Black
- Gang: 2
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 35mm


- Type: USB Socket
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Brass
- Switch Colour: Polished Brass
- Finish: Polished Brass
- Faceplate Depth: 1mm
- Insert: White
- Gang: 2
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 35mm
- USB Input: 130-250V ~ 50/60Hz
- Output 1: 5.0V
- Output 2: 5.0V
- Amperage: 2100mA


- Type: USB Socket
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Screw Length: 30mm
- Plate Material: Brass
- Switch Colour: Polished Brass
- Faceplate Depth: 1mm
- Insert: Black
- Gang: 2
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 35mm
- USB Input: 130-250V ~ 50/60Hz
- Output 1: 5.0V
- Output 2: 5.0V
- Amperage: 2100mA


- Type: Socket
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Brass
- Insert: White
- Amperage: 5 Amp
- Faceplate Depth: 1mm
- Finish: Polished Brass
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box depth required: 35mm
- Back-box Included: No


- Type: Socket
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Brass
- Amperage: 5 Amp
- Insert: Black
- Faceplate Depth: 1mm
- Finish: Polished Brass
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 35mm


- Finish: Polished Brass
- 1 way and 2 way switching: Yes (with 2 way switch)
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Amperage: 10 Amp
- Plate Material: Metal
- Type: Dimmer
- Maximum No. of Lamps: 10 LEDs per Gang
- Wattage (max): 0-120W per Gang
- Gang: 1
- LED Compatible: Yes
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 35mm
- 2 Way: Yes (with 2 way rocker switch)


- Type: Dimmer
- 1 way and 2 way switching: Yes (with 2 way switch)
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Amperage: 10 Amp
- Plate Material: Metal
- Maximum No. of Lamps: 10 LEDs per Gang
- Finish: Polished Brass
- Wattage (max): 0-120W per Gang
- Gang: 2
- LED Compatible: Yes
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 35mm
- 2 Way: Yes (with 2 way rocker switch)


- Type: Dimmer
- 1 way and 2 way switching: Yes (with 2 way switch)
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Amperage: 10 Amp
- Plate Material: Metal
- Maximum No. of Lamps: 10 LEDs per Gang
- Finish: Polished Brass
- Wattage (max): 0-120W per Gang
- Gang: 3
- LED Compatible: Yes
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 35mm
- 2 Way: Yes (with 2 way rocker switch)


- Type: Dimmer
- 1 way and 2 way switching: Yes (with 2 way switch)
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Amperage: 10 Amp
- Plate Material: Metal
- Maximum No. of Lamps: 10 LEDs per Gang
- Finish: Polished Brass
- Wattage (max): 0-120W per Gang
- Gang: 4
- LED Compatible: Yes
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 35mm
- 2 Way: Yes (with 2 way rocker switch)


- Switch Colour: Polished Brass
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Type: Switch
- Finish: Polished Brass
- Amperage: 10 Amp
- Faceplate Depth: 1mm
- Switch Type: Intermediate
- Switching: Three Way
- Gang: 1
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 25mm


- Switch Colour: Polished Brass
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Type: Switch
- Finish: Polished Brass
- Faceplate Depth: 1mm
- Switch Type: Intermediate + Two Way
- Amperage: 10 Amp
- Gang: 2
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Switch Colour: Polished Brass
- Plate Material: Metal
- Switch Type: Intermediate
- Amperage: 10 Amp
- Switching: Three Way
- Faceplate Depth: 1mm
- Gang: 2
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Toggle Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Brass
- Switch Type: Intermediate
- Amperage: 10 Amp
- Finish: Polished Brass
- Gang: 1
- Switch Colour: Polished Brass
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Fused Spur
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Switch Colour: Polished Brass
- Plate Material: Brass
- Faceplate Depth: 1mm
- Finish: Polished Brass
- Gang: 1
- Amperage: 13 Amp
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 35mm


- Type: Fused Spur
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Switch Colour: Polished Brass
- Plate Material: Brass
- Finish: Polished Brass
- Amperage: 13 Amp
- Faceplate Depth: 1mm
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 35mm


- Type: Fused Spur
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Plate Material: Brass
- Amperage: 13 Amp
- Faceplate Depth: 1mm
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 35mm


- Type: Flex Outlet
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Amperage: 16 Amp
- Fitting Instructions: Masking tape must not be used on these products
- Screw Length: 30mm
- Plate Material: Brass
- Screws Included: Yes
- Back-box Included: No
- Finish: Polished Brass
- Gang: 1
- Inserts: White


- Type: Socket
- NTE5 Master Socket Compatible: No
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Master Telephone Socket: Not suitable to replace an NTE5 or master socket with two sockets
- Plate Material: Brass
- Finish: Polished Brass
- Faceplate Depth: 1mm
- Insert: White
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box depth required: 25mm
- Back-box Included: No


- Type: Socket
- NTE5 Master Socket Compatible: No
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Master Telephone Socket: Not suitable to replace an NTE5 or master socket with two sockets
- Finish: Polished Brass
- Plate Material: Brass
- Insert: Black
- Faceplate Depth: 1mm
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Socket
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Plate Material: Brass
- Insert: White
- Faceplate Depth: 1mm
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Socket
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Plate Material: Brass
- Insert: Black
- Faceplate Depth: 1mm
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Socket
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Finish: Polished Brass
- Faceplate Depth: 1mm
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Switch Colour: Polished Brass
- Plate Material: Metal
- Finish: Polished Brass
- Faceplate Depth: 1mm
- Amperage: 20 Amp
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Switch Colour: Polished Brass
- Plate Material: Metal
- Finish: Polished Brass
- Faceplate Depth: 1mm
- Amperage: 20 Amp
- Gang: 1
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 25mm


- Type: Cooker Switch
- Amperage: 45 Amp
- Switch Material: Plastic
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Faceplate Depth: 1mm
- Finish: Polished Brass
- Gang: 1
- Switch Colour: Red
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 47mm


- Type: Cooker Switch & Socket
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Switch Colour: Red/White
- Plate Material: Metal
- Insert: White
- Faceplate Depth: 1mm
- Amperage: 45A / 13A
- Finish: Polished Brass
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 47mm


- Type: Cooker Switch & Socket
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Switch Colour: Red/Black
- Plate Material: Metal
- Insert: Black
- Faceplate Depth: 1mm
- Amperage: 45A / 13A
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 47mm


- Type: Cooker Switch
- Switch Material: Metal
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Switch Colour: Red
- Plate Material: Metal
- Amperage: 45 Amp
- Faceplate Depth: 1mm
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 47mm


- Type: Fan isolator Switch
- Switch Material: Plastic
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Switch Colour: White
- Plate Material: Metal
- Faceplate Depth: 1mm
- Pole: Three Pole
- Gang: 1
- Amperage: 10 Amp
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 35mm


- Type: Fan isolator Switch
- Switch Material: Plastic
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Switch Colour: Black
- Plate Material: Metal
- Faceplate Depth: 1mm
- Amperage: 10 Amp
- Pole: Three Pole
- Gang: 1
- Screws Included: Yes
- Screw Length: 30mm
- Back-box Included: No
- Back-box depth required: 35mm


- Type: Shaver Socket
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Plate Material: Metal
- Insert: White
- Faceplate Depth: 1mm
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 47mm


- Type: Shaver Socket
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Insert: Black
- Finish: Polished Brass
- Faceplate Depth: 1mm
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 47mm


- Type: Blank Plate
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Plate Material: Metal
- Faceplate Depth: 1mm
- Gang: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 16mm


- Type: Blank Plate
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Finish: Polished Brass
- Gang: 1
- Faceplate Depth: 1mm
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: 16mm


- Type: Module Plate
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Finish: Polished Brass
- Plate Material: Metal
- Faceplate Depth: 1mm
- Module Spaces: 1
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: Refer to Grid Modules


- Type: Module Plate
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Finish: Polished Brass
- Faceplate Depth: 1mm
- Module Spaces: 2
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: Refer to Grid Modules


- Type: Module Plate
- Please note: Deeper back box required for this plate
- Fitting Instructions: Masking tape must not be used on these products
- Plate Material: Metal
- Finish: Polished Brass
- Faceplate Depth: 1mm
- Module Spaces: 4
- Screw Length: 30mm
- Screws Included: Yes
- Back-box Included: No
- Back-box depth required: Refer to Grid Modules